Seven income bands appeared in Performance Max. Nobody announced them
A setting nobody at Google has confirmed turned up in a European campaign last week. It matters far beyond the feature itself, because exclusions are the last controls automation has not swallowed.
By Katie Delaney · 2026-08-03 · 18 min read
What actually turned up, and where

A fox reads a field by what has changed since yesterday, not by what the map says should be there. Last week the change was a setting that no announcement had prepared anyone for.
On 24 July 2026 a household income exclusion setting was spotted inside a European Performance Max campaign, reported by Search Engine Land after paid search specialist Thomas Eccel shared the discovery on LinkedIn. Seven options sat in the interface: the top 10% of household income, then 11 to 20%, 21 to 30%, 31 to 40%, 41 to 50%, the lower 50%, and unknown household income.
Two things are worth saying plainly before anybody rewrites a media plan. Google has not formally announced the feature, and Search Engine Land notes it appeared in a single European campaign, which points to a limited rollout rather than a general release. This is a sighting, not a launch.
Read the bands before you rush the strategy
The band structure carries a trap that costs advertisers money every time this targeting appears in another campaign type. Five of the seven bands each cover a tenth of households. One covers half of them. Treating the list as seven comparable options is the fastest way to exclude far more reach than intended.
Smart Bidding will happily spend against whatever audience remains, so excluding the lower 50% is not one exclusion among seven. It is a decision to stop advertising to half the country, taken from a dropdown that makes it look like a minor refinement.
The fox that clears a whole thicket to reach one burrow goes hungry the following week. Applied to a Performance Max account, that is the difference between trimming waste and amputating reach, and the interface offers no warning at all about which one you are doing.
Why exclusions now matter more than targeting
Here is the strategic point, and it is much bigger than one setting. Across the past two years Google has steadily removed the advertiser's ability to say who to reach, while leaving intact the ability to say who not to reach. Positive targeting has become a suggestion. Negative targeting is still a rule. Smart Bidding decides the price, the system decides the audience, and you are left holding the exclusions.
The direction was written into the contract this summer. Updated Google Ads terms took effect on 1 July 2026, and as Search Engine Land reports, they now state that the customer authorises Google and its affiliates to serve ads, including through automated program features that format, select or generate targets, ads or destinations on the customer's behalf.
That sentence is doing enormous work. It is permission for the platform to choose the audience, write the copy and pick the landing page. The same coverage notes advertisers remain responsible for reviewing, approving, editing or removing whatever those systems generate, which is a responsibility without a corresponding control.
Google says the same thing in its own words, which is worth quoting because it settles any argument about interpretation. Its Help Centre notice confirms "the new Terms of Service, which will be effective as of July 1, 2026", and spells out a "continued obligation to review, approve, or remove all campaigns and ad assets generated automatically by Google Ads features", per Google Ads Help.
| Date | Change | What it removes or adds |
|---|---|---|
| 15 April 2026 | Dynamic Search Ads announced as ending | Legacy DSA campaigns to upgrade to AI Max |
| 15 June 2026 | DSA campaign creation restored | Reverses the earlier phase-out step |
| 1 July 2026 | Updated Google Ads terms take effect | Authorises automated generation of targets, ads and destinations |
| September 2026 | ACA and campaign-level broad match auto-upgrade | First tranche moves to AI Max, DSA itself unaffected |
| February 2027 | DSA sunset and auto-upgrade begin | Remaining DSA campaigns move to AI Max |
Set against that sequence, an unannounced exclusion setting stops looking like a footnote. Every control the platform gives back is now a negative one, which means the craft in a modern pmax campaign is subtraction rather than selection.
Reporting tells the same story from the other end of the telescope. The Performance Max channel performance report breaks results across seven channels, Google Search, the Google Display Network, YouTube, Discover, Maps, Gmail and Search partners, and Google is refreshingly blunt about the boundary: "While you can't directly control budget allocation per channel, you can influence it", per Google Ads Help.
Anyone who has run Performance Max since its launch will recognise the pattern. Each release takes a positive lever and returns a negative one, and the accounts that thrive are the ones whose managers stopped mourning the old controls and started mastering the new ones.
Every negative lever Performance Max actually hands you
Strategy without an inventory is just atmosphere. So here is the honest tally of the negative levers a Performance Max campaign gives you today, taken from the documentation rather than the forums, because the gap between what advertisers believe they control and what Google writes down is where budget bleeds quietly into the undergrowth.
Brand suitability is the deepest den of controls, and most accounts have barely opened the door. Google's guidance sets out six: brand exclusions, account-level negative keywords, three inventory suitability tiers (maximum, moderate and limited), excluded content keywords, excluded sensitive content categories, and placement exclusions at account and manager account level, per Google Ads Help. Read the small print on the same page before promising anybody a clean sweep: Google states that "While content exclusions are done to the best of our ability, we can't guarantee that all related content will be excluded", which is a fence rather than a wall.
| Control | Documented ceiling or level | Documented reach |
|---|---|---|
| Account negative keywords | 1,000 per account | Performance Max negative keywords reach "Search and Shopping inventory only", per Google Ads Help |
| Campaign negative keywords | 10,000 per campaign | Same Search and Shopping limit, per Google Ads Help |
| Brand exclusions | Campaign level in AI Max | Named brands, per Google Ads Help |
| URL exclusions | Campaign level in AI Max | "Exclude specific URLs from serving as landing pages in your campaign", per Google Ads Help |
| Inventory suitability | Three tiers: maximum, moderate, limited | Content across the network, per Google Ads Help |
| Placement exclusions | Account and manager account level | Placements across the network, per Google Ads Help |
| Age exclusions | Beta | Google names "betas that let you exclude demographics based on age and target specific devices" in Performance Max, per Google Ads Help |
Two numbers in that table deserve their own moment on the trail. Google states that a maximum of 1,000 negative keywords can be applied at the account level and a maximum of 10,000 at the campaign level, per Google Ads Help, which sounds like a lavish larder until you read the reach. Those keywords are "applicable to Search and Shopping inventory only", per Google Ads Help, so everything outside those two surfaces is steered by suitability settings and placement exclusions instead.
The API says more than the interface does
The clearest sightline sits in the developer documentation, where the platform describes itself without a marketing voice. Google's Ads API criteria reference lists "Income range" as both targetable and excludable at campaign and ad group level, and "Extended demographic" as targetable and excludable at campaign level, on a page carrying the line "Last updated 2026-07-22 UTC", per Google Ads API documentation. Household income is hardly a newcomer either: it is available in 20 markets for Search, Display and Video campaigns and in 21 for Demand Gen, Russia being the single addition, and Search carries Age, Gender and Household income but not Parental status, per Google Ads Help.
Some exclusions are not yours to choose at all, and that is the paragraph regulated advertisers should read twice. Under Google's restricted targeting policy, housing, employment and consumer finance ads in the United States and Canada cannot be targeted by "Gender, Age, Parental status, Marital status, ZIP codes", and "Radius targeting requires setting at least 1 km around any given location", per Google Advertising Policies Help. Negative financial status goes further: Google defines it as "a sensitive interest category" covering "someone's personal financial distress, difficulties, or deprivation", and advertisers in it "can't use advertiser-curated audiences", with Customer Match, Your data segments, Audience expansion and Lookalike segments all unsupported, though "You can use predefined Google audiences", per Google Advertising Policies Help.
Campaign negatives
Maximum negative keywords at campaign level, ten times the account allowance.
That is the whole hedgerow in a single glance: seven documented levers, four hard ceilings, and one rumoured band picker. Lenders, clinics and operators already living inside restricted targeting should read a Performance Max income exclusion as another compliance surface rather than another dial, which is exactly how our iGaming marketing team treats every new negative control that lands.
The AI Max shift, and its shrinking promise
The wider context is the retirement of Dynamic Search Ads. Google announced on 15 April 2026 that DSA would end as a standalone format, with legacy campaigns upgrading to AI Max for Search, according to PPC Land. That announcement put the end of new DSA creation in September 2026. Google has since moved the whole schedule, so treat the April dates as history rather than a plan.
On upgrade, dynamic ad groups convert to standard ad groups with three AI Max features switched on by default: search term matching, text customisation and final URL expansion. Existing URL controls are preserved, which is a small mercy and worth verifying rather than assuming.
The performance claim deserves a closer look, because it has moved. Google cited an average of 7% more conversions or conversion value at a similar cost per acquisition or return on ad spend when using the full feature suite, per PPC Land. At AI Max's initial launch in May 2025 the figure quoted was 14%, per PPC Land.
Both figures are still standing, which is the strange part, and the bases beneath them are not the same. Google's own announcement post ties the 7% to advertisers using the full feature suite compared with using search term matching alone, per Google Blog. The Help Centre meanwhile still states that advertisers activating AI Max "will typically see 14% more conversions or conversion value at a similar CPA/ROAS", footnoted "Source: Google internal data, 2025; for non-Retail advertisers", per Google Ads Help.
Be careful with that chart, and folkfox would rather say so than let it flatter an argument. The two figures were quoted against different comparison bases, so this is a halving of the claim rather than proof of a halving in results. Even read conservatively, though, the direction of the promise is downward while the mandate is upward.
Term exclusions
Maximum terms you can exclude through AI Max text guidelines.
Messaging restrictions
Maximum constraints on what the system may generate in copy.
Income bands
Household income options seen in the Performance Max sighting.
Text guidelines allow up to 25 term exclusions and 40 messaging restrictions, per PPC Land, which sounds generous until you try to fence a regulated category with them. For most brands they are enough. For a lender, an operator or a clinic they are a starting budget.
Who should use Performance Max income exclusions
As Google Ads targeting goes, income is a tempting proxy and a poor one. It correlates with purchase intent in some categories and misleads badly in others, and the difference is worth an hour of thought before anyone opens the setting.
The case for it is real. Search Engine Land notes the exclusions could help advertisers in categories where income is a strong purchase signal, naming luxury goods, financial services, automotive and premium home services, and equally could let value-focused brands exclude higher-income segments.
Exclude the lower 50% on day one
A premium brand assumes affluence equals intent, removes half the population before gathering any evidence, and never learns that its best-converting cohort was aspirational buyers saving for the purchase.
Measure first, exclude narrowly
Run unrestricted for a full purchase cycle, segment conversions by income band in reporting, then exclude only the band that demonstrably fails to convert. Usually that is one band, not five.
Where it goes wrong fastest
Three categories should approach this with real caution. Household income is a modelled attribute rather than a declared one, so accuracy varies by market, and the unknown band can be substantial. Excluding unknown is the single most destructive option in the list, because it removes everybody the model could not classify rather than everybody who failed a test.
Regulated advertisers carry an extra consideration. Excluding audiences by income sits uncomfortably close to the fairness questions that already govern credit and insurance promotion, so teams working in FinTech marketing should route this through compliance before it reaches a campaign. Being technically permitted by a platform is not the same as being defensible to a regulator.
The policy pages already draw part of that line for you. Housing, employment and consumer finance advertisers in the United States and Canada are barred from targeting by age, gender, parental status, marital status or ZIP code, per Google Advertising Policies Help, and an income band is a demographic dimension standing very close to that fence.
For most pmax advertisers the honest answer is duller. Exclusions work best as a scalpel applied to proven waste, and worst as a strategy applied to an assumption. If you cannot name the band you are removing and the evidence that it fails, you are not refining a pmax campaign, you are shrinking it.
Hold that discipline and Performance Max behaves far better than its reputation suggests. Abandon it and Performance Max will happily spend a full budget against an audience you narrowed on a hunch in July.
What to do this week
None of this is urgent in the way a deadline is urgent, and that is precisely why it gets deferred until it is expensive. The February 2027 date for Dynamic Search Ads is now the fixed one. The income exclusion may or may not reach your account. Both reward the same preparation.
Baselining is duller than it sounds and easier than most teams assume. Household income already sits as one of five demographic tabs alongside Age, Gender, Parental status and Combination, reached through Campaigns and then the "Audiences, keywords, and content" dropdown, where you "Click Show table to view conversions, impressions, and cost by demographic segment", per Google Ads Help. Pull that table before you touch a single exclusion.
Open a Performance Max campaign and look for household income under exclusions. Rollout appears limited, so absence today means nothing about next month. Record what you find and the date.
Export conversions by any income or demographic dimension already available to you. An exclusion made without a baseline can never be evaluated, only defended.
List every campaign still using Dynamic Search Ads. Creation is removed in January 2027 and the sunset and auto-upgrade begin in February 2027, so plan the transition across Q4 rather than receiving it.
Fill the 25 term exclusions and 40 messaging restrictions with your genuinely damaging terms and claims, not with obvious negatives. This is a finite allowance and most accounts waste it.
Keep a short record of every control you set and why. When results move, that record is the only way to separate your decisions from the system's.
One more sweep is worth the hour: read your own channel split before you argue about audiences. Google is explicit that you cannot directly control budget allocation per channel and can only influence it through asset quality, audience signals and conversion tracking, per Google Ads Help. Know where the money actually went before you decide who it should have reached.
When the machine chooses the audience, the only steering wheel left is the one marked no.
The broader pmax discipline is not resistance to automation, which is a losing posture and a boring one. It is knowing exactly which decisions remain yours and spending real attention on them. That is what good PPC and paid search looks like now: fewer levers, pulled far more carefully.
It also raises the value of everything upstream of the auction. When the platform controls the audience, the differentiator becomes the offer, the landing page and the brand somebody already trusts, which quietly makes brand strategy a performance lever. Track the exclusions you set, review them monthly, and keep a den of evidence for every one of them.
Frequently asked questions
Are household income exclusions available in Performance Max for everyone?
No. The setting was spotted in a single European campaign on 24 July 2026 and Google has not formally announced it. Treat it as a limited rollout, check your own accounts, and expect availability to vary by market for some time.
What are the seven household income bands?
The options seen were the top 10% of household income, 11 to 20%, 21 to 30%, 31 to 40%, 41 to 50%, the lower 50%, and unknown household income. Five bands cover a tenth of households each, one covers half, and one covers everyone the model could not classify.
Should I exclude the unknown household income band?
Almost never. Unknown means the system could not classify the household, not that the household failed a test. In many markets it is a large group containing perfectly good customers, so excluding it removes reach without removing waste.
What happens to my Dynamic Search Ads campaigns?
Dynamic Search Ads are ending, but later than first announced. Google extended the timeline on 11 June 2026: the sunset and auto-upgrade now begin in February 2027, campaign creation is removed in January 2027, and only Automatically Created Assets and campaign-level broad match auto-upgrade in September 2026.
How many exclusions does AI Max actually allow?
Text guidelines permit up to 25 term exclusions and 40 messaging restrictions, as reported by PPC Land, alongside brand, location and URL controls. That allowance is workable for most advertisers but tight for regulated categories, so fill it with genuinely damaging terms rather than obvious negatives.
Is income a reliable proxy for purchase intent?
Only in some categories. It correlates reasonably in luxury goods, financial services, automotive and premium home services, and misleads badly elsewhere, particularly where aspirational buyers save for a purchase. Measure conversion by band before excluding anything.
What exclusions can I actually apply in Performance Max right now?
Google documents brand exclusions, account-level negative keywords, three inventory suitability tiers, excluded content keywords, excluded sensitive content categories and placement exclusions, plus a beta that excludes demographics by age. Household income exclusions are not in that documented set yet, only in a single sighting.
Do Performance Max negative keywords apply to every channel?
No, and this catches people out. Google states that Performance Max negative keywords are applicable to Search and Shopping inventory only, capped at 1,000 per account and 10,000 per campaign. Display, video and other surfaces are governed by inventory suitability, content exclusions and placement exclusions instead.
The shift from clicks to visibility
Paid search stopped selling clicks and started selling presence, which is the same current that pushed Performance Max towards steering by exclusion alone.
Read the shiftGoogle's campaign mix experiments
Google keeps rearranging which campaign types survive, and every reshuffle lands on the same Performance Max question: what can you still say no to?
See the experimentsChatGPT Ads vs Google Search Ads: which should you budget for?
Before you pour another pound into Performance Max, work out how much of next year's budget belongs in an auction Google does not run.
Compare the twoHow the ChatGPT ad router actually works
A second automated auction is forming beside the first, offering the same bargain Performance Max made: less targeting, more trust in the machine.
Follow the router
Running paid search where the machine picks the audience?
Accounts built around the controls you still hold: deliberate exclusions, evidence before subtraction, and a migration plan for the formats Google is retiring.
A setup guide from Search Engine Land names the seven income brackets and confirms the European rollout began this week.

